Pain on the overhead press usually comes from the shoulder tendons and surrounding tissues being asked to do more than they currently tolerate, from a technique fault that changes where the load lands, or from a mix of both. Where it hurts, when in the rep it hurts and what changes it can help narrow down the likely culprit. Most lifters do not need to stop pressing altogether. They need to change the variation, the load and the range, then progress by criteria.
I'm Parth Suthar, a registered physiotherapist in Ontario and a former competitive powerlifter. This guide is general education, not a diagnosis. It cannot tell you what is wrong with your shoulder, but it can show you what to look for and what to do next.
TL;DR
- Overhead press pain may indicate irritation of the rotator cuff tendons or bursa, the biceps tendon, the AC joint, the labrum, or referral from the neck. The location and timing of pain give clues, but a hands-on assessment is what separates them.
- Separate technique causes (set-up, bar path, bracing, grip, ribcage position) from load-management causes (volume, intensity, frequency, recovery). Fixing only one often leaves the problem in place.
- Modify rather than rest: landmine press, incline or pin press, tempo and paused work, and isometrics, progressed by criteria and not by calendar dates.
- Get assessed in person or urgently for red flags such as sudden severe pain, loss of arm movement, deformity, persistent numbness or tingling, or pain after an accident.
Table of Contents
- Which structures may be involved
- Technique causes
- Load-management causes
- Red flags: when you need in-person or urgent assessment
- Modify the press instead of stopping
- A quick self-check before you press again
- Perspective: why a lifter-specific approach matters
- Working with me virtually
- FAQ
- Sources
Which structures may be involved
The shoulder is a crowded space. During a press, the rotator cuff tendons and a fluid-filled bursa pass under the bony roof of the shoulder blade (the acromion), while the biceps tendon runs along the front and the AC joint sits on top. AAOS describes tendon inflammation or tear, instability, arthritis and fracture as the four main categories of shoulder problems, and notes that overhead activity can irritate the rotator cuff tendons and the bursa. Cleveland Clinic likewise links impingement and rotator cuff tendinitis to overuse, including repeated overhead rotation, though trauma can also be behind it.
Pain during pressing does not point to one tissue by itself. Still, the pattern can give you something useful to bring to an assessment.
| Structure | Where pain is often felt | Clues that may point to it |
|---|---|---|
| Rotator cuff tendons (commonly supraspinatus) | Side of the shoulder, sometimes down the outer upper arm | Pain in the first inches off the shoulders or through the middle of the lift, an arc of painful range, weakness or ache when lowering the arm |
| Subacromial bursa | Top and outer shoulder | Often overlaps with the cuff; may be tender after a spike in volume and ache after sessions |
| Long head of biceps tendon | Front of the shoulder | Tender to pressure at the front, pain with a narrow grip or when the bar sits in the rack position, pain pulling or carrying |
| AC joint | Top of the shoulder, at the end of the collarbone | A small, pinpointable spot, pain at lockout or when reaching the arm across the body |
| Labrum or joint stability | Deep inside the joint, often vague | Catching, clicking, a sense of the shoulder slipping, pain at end range |
| Neck referral | Neck, shoulder blade or down the arm | Tingling or numbness, pain that changes with neck position, little change with how you press |
Three quick observations can sharpen the picture:
- Timing in the rep. Pain at the start of the drive may be a tissue-capacity issue, often after a recent jump in volume. Pain near the top may relate to limited overhead or upper-back mobility. These patterns are common in clinical reasoning, not rules.
- Pinpoint or diffuse. A spot you can cover with one fingertip leans toward the AC joint or biceps tendon. A deep, wide ache leans toward the cuff or bursa.
- Does it follow the neck? If turning or tilting your head changes the arm symptoms, the neck deserves attention before the press does.
None of this diagnoses you. It is a way to describe your pain accurately, which makes the next step quicker.
Technique causes
The overhead press is unforgiving of position because the bar has to travel in a straight line past your face, and your ribcage, spine and shoulder blades all have to cooperate. These are the technique factors I look at first.
- Set-up and rack position. A bar resting too far forward or a wrist stacked poorly under the bar makes the shoulder work from the first inch. A grip that is too wide can load the AC joint and the front of the shoulder. A grip that is too narrow can bunch the elbows.
- Bar path. The bar should travel close to the face and finish over the mid-foot. If you push it forward around the chin and chase it back, the shoulder absorbs extra torque in the middle of the lift.
- Bracing. A press with no abdominal bracing often turns into a lean-back, which borrows range from the lower back and changes shoulder angles. If you are unsure how to brace under load, my guide to the Valsalva manoeuvre for lifting covers how and when to use it.
- Ribcage and lockout position. Flared ribs and an arched back can look like overhead range while the shoulder is not actually reaching it. A lockout with the biceps near the ears and the bar over the mid-foot is a different job from a lockout leaning behind you.
- Grip and wrist. A loose wrist lets the bar roll back and pulls the forearm out of line. This also shows up in elbow pain on the overhead press, which shares some of the same faults.
- Stance. A narrow, locked-knee stance gives you less to push against, so people rely on the lower back and shoulder. A slight glute and quad squeeze can change how the whole press feels.
- Depth of the dip and the bottom position. Starting each rep from a forced, stretched bottom with the elbows pulled far behind the bar adds stress to the front of the shoulder.
If your bench also bothers the shoulder, the same group of faults can show up there. My article on bench shoulder pain and the one on bench press technique are worth a read for the shared grip and shoulder blade ideas.
Load-management causes
Sometimes your technique is fine and the shoulder is simply doing more than it has prepared for. Sports-medicine sources commonly describe load spikes, low strength or endurance, limited mobility, shoulder blade control and previous injury as contributors. Ask yourself these questions:
- Volume. Did your weekly press sets, or sets of dips, push-ups, incline and jerks, rise in the last few weeks? Added pressing from CrossFit or strongman events counts too.
- Intensity. Have you started testing heavy singles or working within a few percent of your max more often than usual?
- Frequency. Are you pressing on back-to-back days without a lighter exposure in between?
- Recovery. Has sleep, work stress or overall training load changed?
- Other overhead demand. Painting, overhead work in a trade job, swimming or throwing sports add to the tally.
A useful rule of thumb in practice: if pain began after a clear change in the load and your technique video looks the same as before, load management is the more likely lever. If the pain has crept in with no change in volume and your bar path or rack position looks different, begin with technique. In many lifters, both play a role, and I like to work on them together.
Red flags: when you need in-person or urgent assessment
Pressing through a shoulder that is not behaving typically is not worth it when any of the following appear. The NHS guidance on shoulder pain advises urgent care for:
- sudden or very severe pain
- being unable to move the arm
- deformity or marked swelling
- persistent pins and needles or numbness
- abnormal skin temperature
- pain after an accident or fall
- severe pain in both shoulders
- a feverish illness alongside the shoulder pain
In Ontario, that means an emergency department or a call to 911 for the serious ones, or an urgent in-person visit to a physician if you cannot get a quick appointment. The NHS also says to arrange an assessment if the pain is getting worse, if moving the arm becomes very difficult, or if there has been no improvement after two weeks. I would add two lifter-specific triggers: a sudden pop followed by weakness when lifting the arm, and night pain that stops you sleeping. Both warrant an in-person assessment, which may include imaging or a physician review.
If none of these apply, the next step is not just to see a doctor and wait. Active management, with changes to the press and a plan, is generally where care begins.
Modify the press instead of stopping
The evidence supports staying active. The University of Calgary Sport Medicine non-operative shoulder protocol says shoulder pain is commonly managed first with progressive exercise, rather than waiting on tests, medication or surgery. It moves through three stages: pain control and range of motion, graded loading, then overall upper-body strengthening. A 2021 Alberta consensus recommends at least 12 weeks of active, strength-based exercise at home or supervised as the main conservative treatment for the principal shoulder pain pathways, and keeps escalation for people who do not improve with an adequate trial.

On variations, the NSCA TSAC report on shoulder rehabilitation states that pressing modifications should be chosen for pain tolerance and for progressive restoration of strength and stability, rather than treating one variation as right for everyone. It notes that a machine press asks for less stabilization than free weights and can be a starting point before barbell and then dumbbell or kettlebell work.

A criteria-based progression
Move to the next stage only when you meet that stage's criteria across more than one session, not when a certain number of weeks has passed. Keep pain at a low, settling level during the work (many clinicians use a ceiling around 3 out of 10 that settles within 24 hours) and stay in the same stage if it does not.
| Stage | Variations | Move on when |
|---|---|---|
| 1. Calm it down | Isometric presses against pins or a wall at a comfortable angle, 30 to 45 seconds holds; landmine press with a light load; supported rows and external rotation work | Daily activities and the isometrics are tolerable, and pain settles back to baseline soon after |
| 2. Load the range you tolerate | Landmine press, incline press, floor press and neutral-grip dumbbell press; pin press from a start height where the first inches do not provoke pain | You can do the planned sets with steady form, with pain staying at or below your ceiling and not building rep to rep |
| 3. Rebuild control | Tempo press (3 seconds down, no bounce), paused press at the sticking point (2 seconds), and pin presses with the pins lowered gradually | Tempo and paused reps stay controlled, the bar path is consistent on video, and the next day is no worse |
| 4. Return to the strict press | Barbell strict press at a reduced load, then a gradual climb in sets and intensity, one variable at a time | Full range of motion without pain, and strength close to your other side or your previous baseline on comparable work |
The University of Calgary protocol lists return-to-sport criteria of full range of motion without pain and strength at least 90% of the unaffected side, and advises discussing the return with a healthcare provider to build a sport-specific plan. That is a good benchmark for stage 4, and a physiotherapist can help test it.
Keep the rest of the programme moving
Pressing is only part of what you do. While the shoulder settles, there is usually plenty you can keep training:
- Squat: the Safety Squat Bar takes the arms out of a demanding rack position, so it can suit lifters whose shoulder objects to the bar on the back. A high-bar or front-loaded position may feel worse than a low-bar one, and the reverse is also possible, so test them.
- Deadlift: a trap bar or block pulls let you load the posterior chain with a neutral grip and less range. Straps can help if grip fatigue pulls your shoulders into poor positions.
- Bench: floor press and a controlled, paused bench with a slightly narrower grip may reduce the stretch at the bottom. Choose what you tolerate, not what looks closest to your competition lift.
- Upper back and shoulder blade work: rows, face pulls and carries, loaded progressively, are not a stretch-only approach. Stretching alone rarely addresses a tissue that has been asked to do too much.
My free guides can help with this: the Lifter's Hip & Lower Back Toolkit covers the squat and deadlift side of staying active, and the lift audit page is a place to start if you want an expert eye on your technique.
A quick self-check before you press again
This is not a test for a diagnosis. It is a way of deciding whether today is a day to press or a day to modify.
- Raise both arms overhead without weight. Is the range similar on both sides, and does it stay comfortable?
- Hold a light isometric press against a pin for 30 seconds. Does the pain stay low and settle quickly?
- Film your first warm-up sets from the side and front. Does the bar travel close to your face, with ribs down?
- Check yesterday. Did pain linger or worsen overnight? If yes, stay one stage back.
If you press and the pain climbs in the set, or you get a sharp catch, stop the set and drop to the previous variation.
Perspective: why a lifter-specific approach matters
As a physiotherapist who also competed in powerlifting, I see shoulder pain on the press as a question about both the tissue and the lift. The tissue question is what is irritated and how much load it tolerates today. The lift question is what the bar path, set-up and bracing are asking of the shoulder. Treating only the first leads to generic rehab, and treating only the second can leave a shoulder that is simply unprepared for the volume.
What I aim to do is describe the likely irritated tissue in lifter terms, review video of your lifts, and build a criteria-based return plan that uses modified variations where appropriate instead of complete rest. That is why the first step in my Initial Assessment is a full history and movement screen, plus a lift analysis if you send videos beforehand.
A free 15-minute call is a fit check only. It is not an assessment or treatment, but it gives us a chance to see whether virtual physiotherapy suits what you are dealing with.
Parth
Working with me virtually
If your press has been sore for more than a couple of weeks, or you keep cycling between rest and re-aggravation, a structured assessment may save time. The Initial Assessment is $130 and follow-up sessions are $100. It runs by video, includes a subjective and objective assessment and a movement screen, and aims to explain what tissue may be irritated and to build a criteria-based plan. No doctor's referral is needed to see a physiotherapist in Ontario, though some insurers require one for reimbursement, and many extended-health plans cover physiotherapy. I provide receipts for claims.

If you want to see how it works before booking, the free 15-minute consult is the place to start, and you can see the full list of services as well.
FAQ
Why does my shoulder hurt when I overhead press?
The pain may indicate irritation of the rotator cuff tendons or bursa, the biceps tendon, the AC joint, the labrum or the neck. Technique, a recent jump in volume or limited overhead mobility can all contribute. Pain alone does not point to one tissue, so an assessment that checks strength, range and history is what separates them.
Can I keep training while my shoulder hurts?
Often you can, with changes. Landmine and incline pressing, tempo and paused work, and isometrics are common starting points, and you can keep squatting and pulling with variations such as the Safety Squat Bar and trap bar. Pain should stay low and settle afterwards. If it builds or lingers, step back a stage.
How long will it take to return to the barbell press?
It depends on how the shoulder responds, so I progress by criteria, not dates. The Alberta consensus recommends at least 12 weeks of active, strength-based exercise as the main conservative care for common shoulder pain pathways, but your own timeline depends on your history and your load.
When should I see someone in person?
See urgent care for sudden severe pain, inability to move the arm, deformity, persistent numbness or tingling, or pain after an accident. Arrange an assessment if pain is worsening or has not improved after two weeks, in line with NHS guidance.
If you want a plan for your press, book with me for a free 15-minute consult at physioparth.com.
Sources
- Shoulder Pain and Common Shoulder Problems, AAOS OrthoInfo
- Shoulder Impingement Syndrome (Rotator Cuff Tendinitis), Cleveland Clinic
- Shoulder pain, NHS
- Non-operative shoulder protocol, University of Calgary Sport Medicine
- Consensus for a primary care clinical decision-making tool for shoulder pain, BMC Primary Care, 2021
- Rehabilitation to performance of the shoulder, NSCA TSAC Report, Issue 80
Recommended
- Elbow Pain on the Overhead Press: Causes and Return Plan
- Wrist Pain on the Bench Press: Causes, Fixes, Return Plan
- Bench Shoulder Pain in Ontario: When a 45° Fix Isn’t Enough
- Bench Press Elbow Pain: 45° Fixes for Strength Athletes
This article is general education for strength athletes and is not a substitute for an individual assessment. Pain that is severe, worsening, or accompanied by numbness, weakness or loss of function needs prompt in-person or medical assessment. Author: Parth Suthar, Registered Physiotherapist (Ontario).
